Author Topic: Monitor \'says no signal\' (Read 655 times)

« **on:** July 21, 2005, 05:35:32 PM »

When I turn on one of my CPUs, the monitor says \'no signal\'

The keyboard lights do not turn on either

Any idea what the problem is?

« **Reply #1 on:** July 21, 2005, 05:48:23 PM »

your CPU is dead

Evi · « **Reply #2 on:** July 22, 2005, 12:13:17 AM »

...and you took crappy care of your computer.

§ôµÏG®ïñD · « **Reply #3 on:** July 22, 2005, 12:14:35 AM »

could be a screwed psu

« **Reply #4 on:** July 22, 2005, 04:41:23 AM »

do the fans start running? If nothing comes on then something fried.. i\'d try to swap PSUs like souly said. It\'s trial and error after that to find out what blew.

« **Reply #5 on:** July 23, 2005, 10:00:46 PM »

When I turn on the computer the fans run

I\'m not sure what a PSU is but if it has to do with power I don\'t think it is a problem unless the keyboard lights not coming on mean something bi

, I can network into the hardrive from another CPU, so I don\'t the HD is shot

The motherboard maybe?

§ôµÏG®ïñD · « **Reply #6 on:** July 24, 2005, 01:26:46 AM »

It can still be a psu, even if the fans run. It may be giving enough voltage to power the mobo, just not the cpu. What type of cpu, motherboard and power supply unit (psu) do u have.

videoholic · « **Reply #7 on:** July 24, 2005, 04:07:21 AM »

It could be the air gap between the monitor cable and the video card. If it becomes to large you need to get a spacer in their to close it up.

I\'d freeze the spacer though. Helps with conductivity.

« **Reply #8 on:** July 24, 2005, 04:20:19 AM »

Did you check the connection to the monitor to the PC?

Hello

Author Topic: Monitor \'says no signal\' (Read 655 times)