Got any mods on your car?

Got a car with any mods on it?

I have a ’91 Camaro Z28 with a 327 Chevy small block in it. I got the motor out of a badly damaged 1965 Corvette. The original horse power spec. on the Vette motor was around 360hp.

In the course of building the car up I was able to outfit the engine with an Edelbrock Rpm Intake, Topped off with a Holley 650 Double pumper carb re-jetted to serve 700. An HEI distributor by MSD graces the engine with mods bringing the spark up to 58,000 volts of current. I placed a standard water pump on the engine and a set of Billet serpentine pullys.

The internal components consist of hydraulic lifters, seamless rods and 1.6 roller rockers. I was able to get my hands on a set of aluminum pushrods and a Lunati Steel crank. The flywheel is a lightweight steel plate made for quicker response times. I touched off the top end of the motor with a set of Dart 202, 63cc heads.

With all that, the car dyno’d at over 400 hp and just a touch under 400 foot pounds of tork.  

Does anybody else have a project car? Let me know the specs, I’d love to hear about it.

Yes, my DURANGO has a Remote Starter
Being in frozen Minnesota I need one to warm the puppy up.


--You can start the truck from the comfort of your house. It will run for 15 minutes before shutting off.

--You can stop for gas, or whatever and turn off the ignition and take your keys and the truck will stay running (for 10 minutes).

--You can have the truck(car) start automatically at the same time every day:)

If ANYONE touches ANY of the controls (brake,gas, shifter, etc) the engine will cut off immediately.

My wife got it for my B-day a few years back:)

[GmanJoe]

I\'m waiting to pay off my Impreza RS. Once it\'s paid off, I\'ll start looking for an Impreza STi engine and tranny. Once this turbo charged flat four (2 liter engine) is in place, I should get at least 280hp on AWD! That should should get me a rather decent acceleration of 0-60 in 4.3 seconds....but I don\'t like drag racing much. I like twisty road courses.

Of course, a turbo engine requires good brakes to stop this monster. So I\'ll probably get 6pot Brembo brakes uo front and 4pot for the rears. Then there\'s the suspension replacement. I was thinking of using DMS shocks...for circuit racing....but with the adjustment for refined daily use. You cand adjust the setting to soft inbound and hard outbound! Just like in GT3! Too bad both Brembo brakes and DMS suspension cost well over $2000 each!

Talking about Camaro\'s. I have two. A 67\' (no will not sell) and a 97\'. Did you know that "the" 67\' camaro is one of the most expensive domestic U.S. cars. Oh BTW, How much can you buy a BMW for in Germany? Anyone know please let me know. the . It\'s still pretty mucha stock car. Any adjustments that would not hurt value, please let me know.

I will rephrase "the" 67\' camaro "convertable".

Originally posted by Bonez
Talking about Camaro\'s. I have two. A 67\' (no will not sell) and a 97\'. Did you know that "the" 67\' camaro is one of the most expensive domestic U.S. cars. Oh BTW, How much can you buy a BMW for in Germany? Anyone know please let me know. the . It\'s still pretty mucha stock car. Any adjustments that would not hurt value, please let me know.

Ummmm, okay. Do you have any mods on those \'maros or what?

Mods..  ha ha ha thats all I do all day..

Audi A4 2.8v6 Quattro(awd) - Xenon lights - Nav System - Sport

Right now on my car, Tinted windows , new Computer chip, Short Shifter, Bel 915RS Radar detector, new shift knob, Winter tires, Kenwood Amp, kenwood sub, rubber winter mats.

In my garage, waiting for it to be warm..

New Suspension - springs and shocks
Air Intake
Exhuast
18x8.5 rims + summer tires

Future upgrades include - SuperCharger - Sway Bars

I go crazy with me car..  I love it.  But I also run a car Group out of Boston so I get the mad dealz....  http://www.bostonaudi.org

You need info on parts and stuff you let me know.  I know a lot about this stuff outside of Audi.  Subaru would be my second forte.

i have
Samwsie
Luke
Myself
and Bobs-hardware in my CAR

BEAT THAT

Originally posted by ooseven
i have
Samwsie
Luke
Myself
and Bobs-hardware in my CAR

BEAT THAT

Chit man you got me beat.

Lowering springs and struts..soon to be upgraded to a complete coilover system. Front and rear strut tower braces. Beefier sway bars in front and back. Cold air intake, UDP, header, ported and polished intake manifold, ported,polished and shaved head.  Custom interior(white and black).., 1 RF 800a2, 1 RF 200a4, kenwood 4 ways in rear, diamond audio component set up front, 3 MTX blue thunder extremes. Pioneer 9200R headunit. 75shot nitrous.

My turbo porject is comming along pretty nicely, just ran out of money to continue. Should be done within the next 2-3 months. Along with a bodykit and a fresh paint job. ANyone wanna donate some funds?

Mods are difficult for me... Here you need a permission for everything, and the cops don`t like mods too.

Anyways, my Impreza has been lowered and broadened. I think of getting an Unichip and a new back box = 250 - 260 hp.

Originally posted by macabre
Mods are difficult for me... Here you need a permission for everything, and the cops don`t like mods too.

Anyways, my Impreza has been lowered and broadened. I think of getting an Unichip and a new back box = 250 - 260 hp.

Where are you located?

[nO-One]

Originally posted by ooseven
i have
Samwsie
Luke
Myself
and Bobs-hardware in my CAR

BEAT THAT

Not only that, but he has me running after it screaming "don\'t leave me.....I\'m lonely and it\'s cold"

Originally posted by ooseven
i have
Samwsie
Luke
Myself
and Bobs-hardware in my CAR

BEAT THAT

damn straight!


we cruise around scotland and all the fine scottish ladys scream for our manlyness!


when the car breaks down we make nO-One push.

Originally posted by luckee


Where are you located?

Germany , and that means:
Power intake: illegal
Group A Rally parts : illegal
Removing the 1. or 2. catalyst/install Downpipe: illegal
and so on...